Select Page

COPPER-T RJ45 TRANSCEIVERS SUPPLIER

LANMEXX -100% COMPATIBLE WITH OVER 90 VENDORS

COPPER-T RJ45 TRANSCEIVERS SUPPLIER

10/100base-t copper sfp transceiver

1000BASE-T COPPER SFP TRANSCEIVER

10/100/1000BASE-T Copper SFP TRANSCEIVER

1000BASE-T Copper SFP Transceiver

LX-T1-RJ45

1000BASE-T Copper SFP Transceiver

LANMexx`s LMX-T1-RJ45 Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Features

  • Up to 1.25Gb/s bi-directional data links
  • Hot-pluggable SFP footprint
  • TX Disable and RX Los/without Los function
  • Fully metallic enclosure for low EMI
  • Low power dissipation (1.05 W typical)
  • Compact RJ-45 connector assembly
  • Access to physical layer IC via 2-wire serial bus
  • 1000 BASE-T operation in host systems with SERDES interface
  • Operating case temperature range of

0°C to +70°C (Commercial)

-20°C to +85°C (Extend)

Applications  

25 Gigabit Ethernet over Cat5 Cable

Related tags: Juniper Networks QFX-SFP-1GE-T            Extreme Networks I-MGBIC-GTX                     Cisco GLC-T

 

 

10/100BASE-T Copper SFP Transceiver

LX-T3-RJ45

10/100BASE-T Copper SFP Transceiver

Description

LANMexx`s LX-T3-RJ45 Copper Small Form Pluggable (SFP) transceiver module is specifically designed for converting 100Base-FX NRZI port interface to 10/100Base-TX interface with RJ45 connector. The transceiver module is compliant with the SFP MultiSource Agreement (MSA) and IEEE802.3u. With the hot pluggability, the module offers a flexible and easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online. The Copper SFP transceivers use an integrated RJ-45 connector with transformer and PHY IC.

Features

  • Hot-pluggable SFP footprint
  • Fully metallic enclosure for low EMI
  • Compact RJ-45 connector assembly
  • It supports RX_LOS(Loss of Signal) function
  • Compatible with IEEE802.3u
  • Access to physical layer IC via 2-wire serial bus
  • A 10/100BASE-TX/ 100BASE-FX converter
  • Operating case temperature range of -40°C to +85°C (Industrial)

Applications  

  • This 100Base-TX Copper SFP Transceiver supports the SFP based switch100Base-FX ports thataccept standard 100Base-FX optics SFP.

Related tags: Cisco GLC-FE-T     Juniper Networks EX-SFP-1FE-T     Extreme Networks MGBIC-100BT     HPE H3C JD089A-T    H3C SFP-FE-T-A 

 

 

10GBASE-T SFP+ Copper Transceiver

LX-T5-RJ45

10GBASE-T SFP+ Copper Transceiver

Description

LANMexx`s LX-T5-RJ45 SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP’s RX_LOS pin for link indication. If pull up SFP’s TX_DISABLE pin, PHY IC be reset.

Features

  • Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
  • Hot-pluggable SFP footprint
  • Compact RJ-45 connector assembly
  • RoHS compliant and lead-free
  • Single +3.3V power supply
  • 10 Gigabit Ethernet over Cat 6a cable
  • Ambient Operating temperature: 0°C to +65°C

Related tags: Cisco SFP-10G-T-S      Arista Networks SFP-10GE-T    Juniper Networks EX-SFP-10GE-T     Dell GP-10GSFP-T 

 

 

10/100/1000BASE-T Copper SFP Transceiver

LX-T2-RJ45

10/100/1000BASE-T Copper SFP Transceiver

LANMexx`s LX-T2-RJ45 Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 10/100/1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module providLX standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Features

  • Up to 1.25Gb/s bi-directional data links
  • Hot-pluggable SFP footprint
  • TX Disable and RX Los/without Los function
  • Fully metallic enclosure for low EMI
  • Low power dissipation (1.05 W typical)
  • Compact RJ-45 connector assembly
  • Access to physical layer IC via 2-wire serial bus
  • 10/100/1000Mbps compliant in host systems with SGMII interface
  • Operating case temperature range of 0°C to +70°C (Commercial) -20°C to +85°C (Extend)

Applications  

25 Gigabit Ethernet over Cat5 Cable

Related tags:  Cisco GLC-TA Compatible 10/100/1000BASE-T SFP      HW 0231A085   H3C SFP-GE-T    Juniper Networks EX-SFP-1GE-T

  

Industrial 1000BASE-T Copper SFP Transceiver

LX-T4-RJ45

Industrial 1000BASE-T Copper SFP Transceiver

LANMexx`s LX-T4-RJ45 Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100meters reach over unshielded twisted-pair category 5cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh

Features

  • Up to 1.25Gb/s bi-directional data links
  • Hot-pluggable SFP footprint
  • TX Disable and RX Los/without Los function
  • Fully metallic enclosure for low EMI
  • Low power dissipation (1.05 W typical)
  • Compact RJ-45 connector assembly
  • Access to physical layer IC via 2-wire serial bus
  • 1000 BASE-T operation in host systems with SERDES interface
  • Operating case temperature range of -40°C to +85°C (Industrial)

Applications  

  • 1.25 Gigabit Ethernet over Cat 5 cable

Related tags:  Cisco GLC-TA Compatible 10/100/1000BASE-T SFP      HW 0231A085   H3C SFP-GE-T    Juniper Networks EX-SFP-1GE-T

  

Copper -RJ45 Optical Transceiver Ordering List

 

Copper -RJ45 Optical Transceiver Ordering List

Ordering information

Part number Speed mode MAC interface Temp
LX-T1-RJ45 1000Mbps SERDES 0~70℃
LX-T2-RJ45 10/100/1000 Mbps SGMII 0~70℃
LX-T3-RJ45 10/100M SGMII 0~70℃
LX-T4-RJ45 1000M SERDES -20°C~+85°C
LX-T5-RJ45 10/100M SGMII -40~85℃

 

We're Here To Unlock Your Connectivity!

Office

Jintian Industrial Building, Guangming New District, Shenzhen 518106, Shenzhen, Guangdong, China 518106 

Hours

M-S: 8am – 11pm

Call Us

Americas Regional Manager: (86)186-8067-4452

European Regional Manager:(86)13670066511

Asia Regional Manager:(86)15657836538