Select Page

LC APC - LC UPC 12F Multi-fiber Pre-terminated Single Mode Breakout Fiber Optic Patch Cable

LC APC – LC UPC 12F Multi-fiber Pre-terminated Single Mode

Breakout Fiber Optic Patch Cable

Breakout Patch cables are installation cables that are suitable for laying in buildings, primarily in cable conduits and cable trays. Can be used as a building backbone or horizontal distribution, and they are operating in an uncontrolled or harsh environment.

 

LANMexx’s Patch cables are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high-speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance. 

 

Connector’s Standard:

LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973.

 LC APC - LC UPC 12F Multi-fiber Pre-terminated Single Mode Breakout Optical Fiber Patch Cable

Optical Specification

Connector

LC

Jacket OD(mm)

 

12cores:12.5mm

 

Fiber Mode

9/125μm

Jacket Color

SM:Yellow/Blue

/White;

Polish

UPC,APC

Wavelength

SM:1310/1550nm

Cable Type

Multi-fibers Breakout 0.9mm unit cable

Jacket Material

LSZH/PVC

Insertion loss

≤0.3dB(IEC Grade C)

Insertion loss

≤0.12dB(IEC Grade B)

Return loss

SM UPC ≥ 50dB(min)

SM APC ≥ 60dB(min)

Interchangeability &Vibration

≤0.2dB

Operating temperature

-40~75°C

Storage temperature

-45~85°C

End-face Quality (SM)

Zone

Range (μm)

Scratches

Defects

Reference

A: Core

0 to 25

None

None

IEC 61300-3-35:2015

B: Cladding

25 to 115

None

None

C: Adhesive

115 to 135

None

None

D: Contact

135 to 250

None

None

E: Rest of ferrule

None

None

 

Length Tolerance

LC APC - LC UPC 12F Multi-fiber Pre-terminated Single Mode Breakout Optical Fiber Patch Cable

 

 

Overall Length(L)(m)

length of tolerance(cm)

0<L<1

+5/-0

1<L<10

+10/-0

10<L<40

+15/-0

40<L

+0.5% x L/-0

 

How to choose correctly the cable jacket: PVC, LSZH or OFNP?

 

Fiber patch cables are now widely used for indoor applications like buildings, factories, office parks, campuses and so on. Whether you choose PVC, LSZH or OFNP jacket depends on where you’re going to run the cable.
The features of PVC, LSZH and OFNP Jacket are as follows:

Ø PVC cable resistant to oxidation and degradation, it is commonly used for horizontal runs from the wiring center.
Ø LSZH cable has a special flam-retardant coating, it is between floors in a building.
Ø OFNP cable is space within the building created by building components, design for the movement of air. It is usually work for vertical runs beween floors.

How to Choose The Right Fiber Optic Cable Type on OM3 or OM4?

 

The difference of OM4 and OM3 fiber mode as the following
Ø OM4 was developed specifically for VSCEL laser transmission and allows 10 Gig / second link distances of up to 550 Meters (compared to 300M with OM3).
Ø The effective modal bandwidth for OM4 is more than double that of OM3.

Ø For OM4 patch cable it is 4700 MHz.km while for OM3 it is 2000 MHz.km.

 

LANMexx  also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc. Please feel free to contact  sales@szlanmexx.com